KINWA CHD760X3000

Troy, Michigan, United States
Images (6)
Overview
Type:
Engine Lathes
ID #:
374276
Condition:
Not Specified
Stock #:
12
Status:
For Sale
Description

30" x 118" Kingston/Kinwa (Chinhung) Model CHD760X3000 Engine Lathe, New 2008, With Inch/Metric Threading, 16" Chuck, Steady Rest and DRO

Specifications

Inch/Metric Threading 20-1200 RPM Spindle Speed Coolant System Toolpost DRO-201 2-Axis Digital Readout 16" 3-Jaw Chuck Steady Rest

Swing
30 in
Centers
118 in
Spindle Bore
4 in

30" x 118" Kingston/Kinwa (Chinhung) Model CHD760X3000 Engine Lathe, New 2008 CATALOG SPECIFICATIONS: Swing over bed 760 mm, 30” Swing over carriage 548 mm, 21.57” Swing over gap 990 mm, 39” Width of gap in front of face plate 270 mm, 10.63” Distance between centers 3000mm, 118” Width of bed 400 mm, 15.75” Stroke of tool post 242 mm, 9.52” Stroke of cross slide 400 mm, 15.74” Headstock Spindle bore 104 mm, 4.09” Taper of spindle bore & center MT7 x MT5 Number of spindle speeds 12 Spindle speed ( 60 HZ ) 4 P : 13, 20, 30, 47, 70, 105, 150, 230, 340, 530, 800, 1200 rpm 6 P : 8, 13, 20, 31, 47, 70, 100, 150, 230, 350, 530, 800 rpm Threading & Feeds Number of feeds 36 Range of longitudinal feeds metric 0.037 ~ 1.04 mm / rev ( P = 6 mm, 12 mm ) 0.035 ~ 0.98 mm / rev ( 4 TPI, 2 TPI ) Range of cross feeds Half of longitudinal feeds Leadscrew diameter 45 mm Leadscrew pitch 4 TPI, P = 6 mm ( 2 TPI, P = 12 mm ) Range of inch pitches 2 ~ 72 TPI / 44 Kinds ( 1 ~ 42 TPI / 48 Kinds ) Range of metric pitches 0.2 ~ 14 mm / 39 Kinds ( 0.4 ~ 28 mm / 44 Kinds ) Tailstock Quill stroke 250 mm, 9.84” Quill diameter 80 mm, 3.14” Quill taper MT # 5 Motor Main motor ( 30 min. ) 7.5 HP / 6 P Coolant pump motor 1 / 8 HP • Bed is made of meehanite and is hardened and precisely ground, Hardness is HS 70 degree. • Automatic and manual forced Lubrication pump supplies oil to cross slide and bedways. • Oil distributor may be adjusted to lubricate bedway, cross slide, or both. • Starting lever with safety device.